Finger Weaving Arrowhead Pattern

How To Make Finger Weaving Arrowhead Pattern Easily?

Finger weaving is a traditional craft that involves interlacing yarn or thread with your fingers to create patterns and designs.

It is especially popular among the Métis people, a distinct culture of mixed Indigenous and European ancestry in Canada.

One of the most common patterns in finger weaving is the arrowhead, which resembles a series of arrows pointing in the same direction.

The arrowhead pattern can be woven in different colors and widths and combined with other patterns to create more complex designs.

In this article, we will show you steps to make finger weaving arrowhead pattern simply and easily.

Materials For Finger Weaving Arrowhead Pattern

To start finger weaving arrowhead pattern, you will need the following materials and tools:

Yarn or thread in two or more colors. You can use any yarn or thread, but ensure it is not too thick or too thin. A medium-weight yarn or thread is ideal for finger weaving.

  1. A pair of scissors to cut the yarn or thread.
  2. A safety pin or a tapestry needle to secure the ends of the yarn or thread.
  3. A flat surface to work on, such as a table or a board.
  4. A measuring tape or ruler to measure yarn or thread length.

How To Start Finger Weaving Arrowhead Pattern?

To finger weave the arrowhead pattern, you will need to follow these steps:

Prepare The Yarn Or Thread

First, you must prepare the yarn or thread for finger weaving. You will need to cut several strands of yarn or thread in two or more colors, depending on the width and the color scheme of the pattern you want to make.

For example, if you want to make a narrow arrowhead pattern with two colors, you will need four strands of yarn or thread in each color.

You will need six strands of yarn or thread in each color to make a broader arrowhead pattern with three colors.

The length of the yarn or thread should be about four times the length of the finished product you want to make.

For example, if you want to make a belt that is 100 cm long, you will need to cut the yarn or thread to be 400 cm long. The yarn or thread will shrink and tighten as you weave it.

After you cut the yarn or thread, you must tie the ends of the strands together in a knot. Then, you must secure the knot to a fixed point, such as a safety pin or a tapestry needle.

You can attach the safety pin or tapestry needle to your clothing, the edge of the table, or the board you are working on. This will help you to keep the yarn or thread taut and prevent it from tangling as you weave it.

Arrange The Yarn Or Thread

Next, you must arrange the yarn or thread in a particular order to create the arrowhead pattern. You must divide the yarn or thread into two groups, one for each hand.

Each group should have the same number of strands and the same color sequence. For example, if you use four strands of yarn or thread in each color, you will have eight strands in each group.

The color sequence for each group could be red, blue, red, blue, red, blue, red, blue.

To arrange the yarn or thread, you must hold one group in each hand and spread the strands between your fingers.

You must use your thumb, index finger, middle finger, and ring finger to hold the strands and free your pinky finger.

You will need to assign a number to each finger, starting from the thumb as number one and ending with the ring finger as number four.

Finger Weaving Arrowhead Pattern
You can make the Finger Weaving Arrowhead Pattern easily.

You will also need to assign a letter to each strand, starting from the strand closest to your thumb as A and ending with the strand farthest from your thumb as D.

For example, if you are holding the group with the color sequence red, blue, red, blue, red, blue, red, blue in your left hand, you will have the following arrangement:

Thumb (1): Red (A)

Index finger (2): Blue (B)

Middle finger (3): Red C

Ring finger (4): Blue (D)

You must repeat the same arrangement for the other group in your right hand but in reverse order.

For example, if you are holding the group with the same color sequence in your right hand, you will have the following arrangement:

Thumb (1): Blue (A)

Index finger (2): Red (B)

Middle finger (3): Blue C

Ring finger (4): Red (D)

The arrangement of the yarn or thread is essential for creating the arrowhead pattern. Before you start weaving, You must ensure the strands are in the correct order and position.

Explore more about Flat Felled Seam vs French Seam: Top Key Differences.

Weave The Yarn Or Thread

You can weave the yarn or thread to create the arrowhead pattern. You must follow several steps to weave the strands from one hand to the other and back again.

You must repeat these steps until you reach the desired length of the product you want to make.

The steps to weave the yarn or thread are as follows:

Step 1:

Move the strand A from your left hand to your right hand, and place it between your thumb and index finger.

You will now have two strands between your thumb and index finger in your right hand and no strand between your thumb and index finger in your left hand.

Step 2:

Move the strand B from your right hand to your left hand, and place it between your thumb and index finger.

You will now have two strands between your thumb and index finger in your left hand and no strand between your index and middle finger in your right hand.

Step 3:

Move strand C from your left hand to your right hand and place it between your index and middle finger.

You will now have two strands between your index and middle finger in your right hand and no strand between your middle and ring finger in your left hand.

Step 4:

Move the strand D from your right to your left hand, and place it between your middle and ring finger.

You will then have two strands between your middle and ring finger in your left hand and no strand between your ring finger and pinky finger in your right hand.

You have completed one cycle of weaving the yarn or thread. You will notice that the strands have crossed each other in the middle, creating a V-shape. This is the beginning of the arrowhead pattern.

Step 5:

Move strand A from your right to your left hand and place it between your thumb and index finger.

You will now have two strands between your thumb and index finger in your left hand and no strand between your thumb and index finger in your right hand.

Step 6:

Move the strand B from your left to your right hand, and place it between your thumb and index finger.

You will now have two strands between your thumb and index finger in your right hand and no strand between your index and middle finger in your left hand.

Step 7:

Move strand C from your right to your left hand and place it between your index and middle finger.

You now have two strands between your index and middle finger on your left hand and no strand between your middle and ring finger on your right hand.

Step 8:

Move the strand D from your left to your right hand, and place it between your middle and ring finger.

You will now have two strands between your middle and ring finger in your right hand and no strand between your ring finger and pinky finger in your left hand.

You have completed another cycle of weaving the yarn or thread. You will notice that the strands have crossed each other in the middle again, creating another V-shape.

This is the continuation of the arrowhead pattern.

You must repeat steps 3.1 to 3.8 to achieve the desired product length. You will see that the arrowhead pattern will emerge as you weave the yarn or thread.

Moreover, you can change the color of the strands as you weave to create different effects and variations.

Finish The Product

When you have reached the desired length of the product you want to make, you will need to finish the product by securing the ends of the yarn or thread.

You can do this by tying the ends of the strands together in a knot or by weaving them back into the product using a tapestry needle.

Similarly, you can add embellishments, such as beads, buttons, or tassels, to decorate the product and make it more unique and personal.

You have successfully made finger weaving arrowhead pattern. You can use this pattern to make various products, such as belts, sashes, bracelets, necklaces, and more.

You can also experiment with different colors, widths, and combinations of patterns to create your designs and styles. Finger weaving is a fun and creative craft you can enjoy and share.

Conclusion

Finger weaving arrowhead pattern is a simple and easy way to create beautiful and unique products with your fingers.

You can use this technique to make belts, sashes, bracelets, necklaces, and other accessories in different colors and widths. Combining the arrowhead pattern with other patterns can create more complex designs.

Furthermore, it is a fun and creative craft you can enjoy and share. It is also a way to connect with the traditional culture and heritage of the Métis people, known for their finger-weaving skills.

Explore more about knit toe up socks on Circular Needles: a complete guide.

Leave a Comment

Your email address will not be published. Required fields are marked *