Intarsia Patterns Knitting

Learn How To Start With Intarsia Patterns Knitting

Intarsia knitting is a fun and creative way to add color and patterns to your knitwear.

This technique involves knitting with multiple yarn colors in separate sections without carrying the yarn across the back of the work.

You can create shapes and images in your knitting, such as animals, flowers, letters, and more.

In this article, we will show you how to knit intarsia patterns and share some examples of knitting patterns you can try.

What You Need For Intarsia Patterns Knitting?

To knit intarsia patterns, you will need the following materials:

Yarn In Different Colors

When creating an intarsia project, it is important to choose compatible yarn weights and fibers that work well with your needles.

You will need a primary color for the background of your project, as well as one or more contrasting colors to create the intarsia motifs.

Knitting Needles

You can use straight or circular needles, depending on the project.

Similarly, the size of the needles should match the yarn and the pattern gauge.

Yarn Bobbins

These small plastic or cardboard devices hold a small amount of yarn. You will need one bobbin for each color section in your intarsia pattern.

You can also use small balls of yarn instead of bobbins, but make sure they are manageable and manageable.

Furthermore, you will need a Tapestry needle to weave in the ends of the yarn after you finish knitting.

How To Knit Intarsia Patterns?

To knit intarsia patterns, you will need to follow these steps:

Read The Pattern

Intarsia patterns typically include a chart that displays the color changes and shape of the motif.

Similarly, each square on the chart means one stitch, and each color represents a specific yarn color.

The chart is read from right to left on the right side (knit) rows and from left to right on the wrong side (purl) rows.

You will also need to pay attention to the written instructions, which will tell you how many stitches to cast on, how to shape the piece, and how to finish it.

Prepare The Yarn

Before you start knitting, you must wind some yarn onto the bobbins.

You will need to estimate how much yarn you will need for each color section based on the size of the motif and the gauge of the yarn.

You can also use a kitchen scale to weigh the yarn or a yarn calculator to estimate the yardage. You can also wind more yarn than you need and cut off the excess later.

Ensure you leave a long tail of yarn at the beginning and end of each bobbin, which you will use to join the colors and weave in the ends.

Cast On

Using the primary color, cast on the number of stitches the pattern indicates. You can use any cast-on method you prefer, such as the long-tail cast-on or the cable cast-on.

Knit a few rows in the primary color, following the pattern instructions, until you reach the row where the intarsia motif begins.

Change Colors

When you reach the point where you need to change colors, drop the primary color and pick up the contrasting color from the bobbin.

To avoid creating holes in your knitting, twist the two yarn colors around each other at the back of the work. To do this, bring the new color under the old one and then knit the next stitch with the new one.

Intarsia Patterns Knitting
You can easily change colors.

This will create a loop of yarn that will secure the color change. You can also use a slip-stitch edge to hide the color changes at the sides of the work.

To achieve this, slip the first stitch of each row purlwise with the yarn in front and knit the last stitch of each row, holding both yarn colors together.

Also, read more about Knitted Beanie Patterns for Men: Step-by-Step Guide.

Follow The Chart

Continue knitting with the contrast color, following the chart for the intarsia motif. When you need to change colors again, repeat step 4, twisting the yarns at the back of the work.

Make sure you keep the tension of the yarn even and avoid pulling the yarn too tight or too loose. You can also use stitch markers to mark the color changes, which will help you keep track of the chart.

You will have multiple strands of yarn hanging from the back of the work, which you will need to untangle occasionally.

You can also use a yarn holder or a clip to keep the bobbins in place and prevent them from rolling around.

Finish The Motif

You can cut off the contrast colors when you finish the intarsia motif, leaving a long yarn tail.

You can also carry the contrasting colors along the back of the work if you need them again later in the pattern.

Continue knitting with the primary color, following the pattern instructions, until you reach the end of the piece.

Bind Off

Bind off the stitches like you cast them on using the primary color.

You can use any bind-off method you prefer, such as the standard bind-off or the stretchy bind-off.

Moreover, you can cut off the yarn, leaving a long tail.

Weave In The Ends

Using a tapestry needle, weave in the ends of the yarn on the wrong side of the work.

You can use the duplicate stitch method, which mimics the shape of the knit stitches, or the backstitch method, which creates a secure seam.

Ensure you weave in the ends in the same color section as the yarn and avoid crossing over to a different color section.

You can also use the ends to close any gaps or holes that may have formed in the intarsia motif. Trim off any excess yarn.

Examples Of Intarsia Knitting Patterns

Now that you know how to knit intarsia patterns, you can try some examples yourself.

A wide variety of patterns are available, ranging from simple to complex and from modern to vintage.

You can find more intarsia knitting patterns online or create your designs using a chart maker.

Here are some examples of Intarsia knitting patterns:

Pointbox Scarf

This scarf is an excellent project for beginners practicing intarsia knitting with multiple colors.

The pattern uses a simple garter stitch and a colorful palette of yarn.

The frequent color changes will keep you interested and challenged, creating a unique, groovy scarf.

Veintricuatro Hat

This hat is a perfect project for learning how to knit intarsia in the round.

The pattern uses a circular needle and a stranded knitting technique to create a geometric design.

The pattern also includes detailed instructions and tips on knitting intarsia in the round and avoiding common pitfalls.

Bargello Easy Poncho Pattern

The Bargello Easy Poncho Pattern is a stunning project for intermediate intarsia knitters who want to try something different.

To create a striking effect, the pattern uses a variegated yarn and a bargello technique. The bargello technique is a method of knitting that creates a zigzag pattern by shifting the color changes in each row.

Intarsia Patterns Knitting pancho
You can easily make intarsia patterns by knitting pancho.

The pattern has a video tutorial and a color chart to help you follow the bargello technique and the intarsia color changes. The poncho is knit flat in two pieces and then seamed together.

Intarsia Heart Cowl

The cowl is knit flat and then seamed together to form a loop. The pattern also includes a chart and a schematic to help you shape the cowl and follow the color changes.

You can choose any colors of yarn that match your style or follow the original color scheme of the pattern.

The cowl is soft and cozy and perfect for wearing on a cold day.

Vintage Intarsia Sweater

You might want to try this one for a vintage intarsia sweater pattern. This sweater is a classic project for vintage intarsia knitters who want to channel some retro vibes.

The pattern uses a stockinette stitch and a floral intarsia motif to create a charming, cozy garment. The sweater has a round neckline, long sleeves, and ribbed edges.

The intarsia motif features a large flower in the center, surrounded by smaller flowers and leaves.

The pattern also includes a chart and a size guide to help you customize the sweater according to your measurements and preferences.

You can choose any color of yarn that suits your style or follow the original color scheme of the pattern.

Conclusion

Intarsia knitting is a wonderful way to add color and patterns to your knitwear. It allows you to create shapes and images in your knitting, such as animals, flowers, letters, and more.

Intarsia knitting is not difficult to learn but requires some preparation and attention to detail. It is a fun and creative technique that can make your knitting projects more exciting and unique.

Learn more about how to make finger weaving arrowhead patterns easily.

Leave a Comment

Your email address will not be published. Required fields are marked *